SteelCheck is a battery operated 3 channel (Hall Sensor and 2 coil) tube inspection unit for Carbon Steel (Ferromagnetic Tubes) using Magnetic Flux Leakage. Unlike other remote field eddy current method it is unaffected by external Aluminium Fins and has the capability to discriminate between external and internal defects. Packaged as a highly portable, battery operated flaw detector at an attractive price, the SteelCheck offers exceptional value for money. Supplier: Ether NDE Ltd.
SteelCheck is a dedicated single method tube inspection instrument for the identification of OD, ID Defects and Wall Thinning. Portable and rugged the battery operated, the 3 channel tube inspection unit has been developed for Carbon Steel (Ferromagnetic) Tubes, using Magnetic Flux Leakage. Unlike other remote field eddy current method it is unaffected by external Aluminium Fins and has the capability to discriminate between external and internal defects. Packaged as a highly portable, battery operated flaw detector at an attractive price, the SteelCheck offers exceptional value for money.
Used for Eddy Current Flaw Detection (ECT) specifically on ferromagnetic materials (steel) for crack and defect detection. Its core function is Non-Destructive Testing (NDT) of critical steel structures.
| PROBE | |
| Connector | 10way LEMO 2B |
| Channels | 1 Hall Effect Sensor, 2 coils |
| Construction | Stainless Steel/Titanium |
| Max Pull | 100kg |
| GAIN | |
| Longevity | Greater than 1000 tubes |
| Channels | 3 independent channels with gain lock |
| Range | Gain adjustable 0 to +72dB |
| Increments | 0.1, 1 and 6 dB Steps |
| Bit Depth | 12bit |
| DATA CONVERSION | |
| Sample Rate | 5kHz |
| Dynamic Range | 40dB |
| FILTERS | |
| Normal High Pass | DC to 1kHz |
| Normal Low Pass | 5 to 1kHz |
| ALARMS | |
| Level | Fully configurable, Freeze, Tone or visual. |
| Type | 24bit colour, daylight readable, 5.7″ (14.5cm) screen. |
| DISPLAY | |
| Viewable Area | Horizontal x Vertical – 4.6″x 3.4″ (115.2 x 86.4mm) |
| Resolution (pixels) | 840 x 480 |
| Configurable Screen | Full Screen, up to 4 panes with variable function. |
| Display Modes | Time base (0.1-20 seconds, Stripchart and Waterfall) |
| Graticules | None, Grid (4 sizes: 5, 10, 15 at 20% FSH) |
| OFFSET | |
| Trace Position | ±150% |
| Setup | Micro SD up to 32GB, storing over 10,000 settings |
| STORAGE | |
| Stored Screen Shots | Micro SD up to 32GB, storing over 10,000 settings |
| Inspect | Comprehensive Record, Replay and Storage |
| PC Connectivity | USB (Full PC remote control plus Real Time) |
| OUTPUTS | |
| VGA | Full 15 way VGA output. |
| Languages | English. Others to follow. |
| POWER | |
| External | 100-240V. 50-60Hz. 700mA. |
| Battery | Internal 8.4V @ 3200mAh. |
| Running Time | 100% backlight over 8hrs. |
| Charging Time | 2.5hrs charging time. Simultaneous charge and operation. |
| PHYSICAL | |
| Weight | 1.2kg (2.7lbs) |
| Size (w x h x d) | 237.5mm x 144mm x 52mm (9.4″ x 5.7″ x 2.1″) |
| Material | Aluminium alloy Mg Si 0.5 powder coated |
| Operating Temperature | -20°C to +60°C. |
| Storage Temperature | Nominal for up to 12 months. -20°C to +35°C. |
| IP Rating | IP54 |
SteelCheck, 3 Channel Flux Leakage Tube Testing Portable Flaw Detector.
Power Adapter + Input Plugs (UK, EU, US & Australia)
Adjustable Padded Shoulder Strap
Quick-Release Clips
Soft Carry Case
USB CABLE – A to MINI B, 1m
Quick Reference Card – SteelCheck
User Manual on USB
Additional Accessories:
Standard probes, cal tubes and software:
Ferrous ET Tester, Magnetic Weld Inspection, Steel Eddy Current System, Low-Frequency ET Flaw Detector
The SteelCheck is specific for steel because it uses Magnetic Flux Leakage (MFL), a non-destructive testing method dedicated to inspecting ferromagnetic materials like carbon steel tubing, unlike standard Eddy Current Testing.
**Errors and omissions excepted (E&OE)
Our team of Non-Destructive Testing experts is ready to help you find the perfect equipment and solutions tailored to your specific industry requirements.
