Accessories

Phoenix HSSW 2-45° Single Angle High Temp (SMS) – Lemo00

Metal case transducers recommended for continuous use at 120°C or intermittently at 200°C.

WTOFI 12/60 TOFD Wedge, Plastic, 60 degree

Manufactured in black plastic with irrigation and gimbal pin options. For use with DTOF and CDTOF transducers.

Sonatest TSTARC 4 MHz Twin Crystal UT Probe

High-resolution detection of small flaws and accurate thickness measurement in challenging components is solved by this TSTARC 4MHz Twin Crystal UT Probe. This dual element probe uses a separated crystal design to improve signal-to-noise ratio and enhance near-surface resolution. Supplier: Sonatest Ltd.

Phoenix LSW 1-45° Single Angle – Lemo00

Ideal for the general purpose testing of welds, plate, pipe tubing, castings and forgings.

Phoenix Magman Circumferential & Longitudinal Weld Scanner

Achieve consistent, high-precision data capture on welds with an automated scanning platform. The MagMan is a versatile magnetic scanner designed for automated circumferential and longitudinal weld inspection on pipes and vessels. It uses powerful magnetic wheels for secure adhesion and provides consistent data capture for advanced NDT techniques such as Phased Array UT (PAUT) and Time-of-Flight Diffraction (TOFD). It dramatically improves the reliability and repeatability of weld inspection data. Supplier: Phoenix Inspection Systems Ltd.

CDTOF 10/01–10MHz 3mmØ Composite TOFD probe M12 thread – Lemo00

Highly damped transducers in a threaded housing, for use with demountable wedges in piezo-composite materials.

Phoenix SAC 2-45° – 10mm Single Angle – Lemo00

Used for the inspection of coarse grained and attenuative materials such as stainless steel or duplex.

Phoenix AE-ENCLMP-2.5M-TERM – C-Clamp Encoder incl 2.5m cable

C-Clamp Encoder including a 2.5m cable.

Phoenix plastic WREN 12/60 – 60° irrigated M12 thread

Ideal for use with the WREN Scanner and DTOF and CDTOF transducers with a reduced land, enabling wedges to sit closer to the weld cap.

Phoenix SC 1 – 20 Single Compression – Lemo00

Used to measure thickness and detect flaws on plates, bars, forgings and castings. Constructed in a durable plastic case with a ceramic face and integrated stainless steel wear ring.

CDTOF 10/02-10MHz, 6mmØ M12 Transducer – Lemo00

Highly damped transducers in a threaded housing, for use with demountable wedges in piezo-composite materials.

Phoenix SMS 5-45° top entry – Subvis

Ideal for inspections in areas with reduced access.

DTOF 5/01-5MHz x M12 TOFD transducer

Highly damped ceramic faced transducers in a threaded housing.

Phoenix SMS 5-60° top entry – Subvis

Ideal for inspections in areas with reduced access.

Phoenix SC5-5 Single Compression – Subvis

Used to measure thickness and detect flaws on plates, bars, forgings and castings. Constructed in a durable plastic case with a ceramic face and integrated stainless steel wear ring.

Phoenix SSHSC 4-10 High Temp Compression (SMS) – Lemo00

Durable single compression wave transducers in a stainless steel case with side entry connectors. Recommended temperature rating: Continuously at 120°C, intermittently at 200°C.

End of Results

Gammatec Contact Block

Need Assistance or Looking for Something Else?

Our team of Non-Destructive Testing experts is ready to help you find the perfect equipment and solutions tailored to your specific industry requirements.

+27 16 423 7731 Contact Us

Acoustic Emission (AE)

Chemicals

Electromagnetic (ET)

Hardness (HT)

Magnetic Particle (MPI)

Material Analysers (MA)

Post-Weld Heat Treatment (PWHT)

Radiography (RT)

Ultrasonic (UT)

Visual (VI)

Wire Rope

Quick Resources