Gammatec Sidebar Resources

Quick Resources

Ultrasonic (UT)

Find Ultrasonic Testing (UT) equipment including flaw detectors, thickness gauges, phased array systems, guided wave inspection, transducers, wedges, calibration blocks & couplants. Professional solutions for accurate non destructive inspection.

Cygnus 1 EX Intrinsically Safe Ultrasonic Thickness Gauge

Conduct accurate corrosion surveys safely in explosion-risk areas without removing protective coatings. The Cygnus 1 EX is an Intrinsically Safe (IS) Ultrasonic Thickness Gauge, certified to ATEX, IECEx, and CSA standards for use in Zone 0 and Zone 1 hazardous areas. It uses the Multiple-Echo technique to measure metal thickness through coatings (up to 20 text{ mm} thick). This rugged, compact gauge ensures safe, accurate corrosion monitoring and integrity checks in environments like petrochemical and offshore facilities. Supplier: Cygnus Instruments Ltd.

GUL Wavemaker G4 Mini Guided Wave Testing System

Achieve long-range pipe integrity screening in congested or restricted areas where full access is impossible. The Wavemaker G4 Mini is a compact and highly portable Guided Wave Testing (GWT) System used for long-range inspection of piping. It features advanced signal processing and an intuitive interface, making it quick to deploy and analyze. The G4 Mini is capable of inspecting long pipe runs for metal loss and corrosion from a single point, significantly reducing the need for extensive scaffolding and providing rapid screening results. Supplier: Guided Ultrasonics Ltd. (GUL)

Huatec TG 8825 FN Coating Thickness Gauge

Measure coating thickness accurately on both ferrous and non-ferrous substrates with one device. The TG 8825 FN Coating Thickness Gauge is a dual-function instrument that automatically detects the substrate material and uses the appropriate method (Magnetic Induction for Fe and Eddy Current for non-Fe). It ensures quality control of protective coatings to prevent premature corrosion and ensure long-term asset integrity. Supplier: Huatec

Phoenix 45 ° 5Mhz sub miniature single crystal shear wave – Subvis

Ideal for inspections in areas with reduced access.

Cygnus 6+ Ultrasonic Thickness Gauge

Provide the full range of UT thickness measurement modes in a single, robust gauge. The Cygnus 6+ is a versatile Ultrasonic Thickness Gauge that incorporates Multiple-Echo, Single-Echo, and Echo-Echo modes. This triple-echo capability ensures accurate readings on coated, uncoated, or heavily corroded metals. It solves the need for an all-purpose gauge with advanced measurement and data features for complex corrosion surveys. Supplier: Cygnus Instruments Ltd.

Phoenix SSTC 5-10 Twin Compression – Lemo00

Standard twin crystal transducers housed in a stainless steel case for extra durability.

GUL QSR Axial Guided Wave Testing System

Quickly screen axial (longitudinal) flaws in pipes, such as grooving corrosion, from a single point. The QSR Axial is a specialized Guided Wave Testing (GWT) System that focuses on axial wave modes to efficiently detect longitudinal discontinuities in piping. This is essential for screening long lengths of pipe for grooving or seam-line corrosion that circumferential waves may miss. Its portability makes it an ideal, rapid screening tool for integrity inspections in complex industrial assets. Supplier: Guided Ultrasonics Ltd. (GUL)

Huatec TG 8826 FN Coating Thickness Gauge

Capture and manage large volumes of coating thickness data across various substrates. The TG 8826 FN Coating Thickness Gauge is a dual-function instrument with integrated data logging for ferrous and non-ferrous substrates. It streamlines large-scale inspection by storing thousands of readings, ensuring traceable quality control of protective coatings and efficient reporting on surface preparation. Supplier: Huatec

Phoenix 4MHz 70° (ATSW) – Lemo00

Holds two crystals mounted at inward angles that provide improved near-surface resolution and superior signal-to-noise ratio. Designed for use with the extensive range of Phoenix manual and automated scanners.

Huatec TG3300 Ultrasonic Wall Thickness Gauge

Provide essential, accurate thickness measurements for materials like plastic, glass, and composites. The TG3300 Ultrasonic Wall Thickness Gauge is a standard pulse-echo UT instrument specifically designed for metal, non-metal and non-corrosion thickness gauging. It is essential for verifying the uniform wall thickness of non-destructive components in manufacturing and for basic material verification tasks. Supplier: Huatec

Phoenix SSW 2,5-70° Single Angle – Lemo00

Ideal for the general purpose testing of welds, plate, pipe tubing, castings and forgings.

Sonatest VEO 3 Phased Array Flaw Detector

The Sonatest VEO 3 is a high-end, versatile phased array ultrasonic testing (PAUT) instrument used for non-destructive testing (NDT) of complex materials and welds. Key features include a 32-channel phased array beamformer with TOFD capabilities, two conventional UT channels, and advanced imaging like Total Focusing Method (TFM) and TFMi™ for high-resolution, 2D and 3D defect visualization. Supplier: Sonatest Ltd.

Elcometer 456 Ferrous & Non-Ferrous Dry Digital Coating Thickness Gauge

The Elcometer 456 Coating Thickness Gauge sets new industry standards by delivering reliable, accurate, and repeatable coating thickness measurements. Designed to improve productivity and efficiency, this advanced dry film thickness gauge is ideal for professionals in coatings inspection, manufacturing, and quality control.

Phoenix Brass WREN 12/45 – 45° irrigated M12 thread

Ideal for use with the WREN Scanner and DTOF and CDTOF transducers with a reduced land, enabling wedges to sit closer to the weld cap.

Cygnus Dive Underwater Thickness Gauge

A sturdy, wrist-mountable ultrasonic underwater thickness gauge, the Cygnus DIVE offers a crucial free hand for ultrasonic thickness measurement. (UTM) undersea. Even in the worst visibility, the diver and his camera can readily view the huge, brilliant display with Live A-scan. The gauge has an easy-to-use menu with only two buttons to press. Supplier: Cygnus Instruments Ltd.

Phoenix TC 1-20 Twin Compression – Lemo00

Suitable for use on corroded and pitted surfaces, thickness measurement, brazed joint testing and for lamination detecting. High gain and resolution are achieved with a very low cross-talk.

End of Results

Gammatec Contact Block

Need Assistance or Looking for Something Else?

Our team of Non-Destructive Testing experts is ready to help you find the perfect equipment and solutions tailored to your specific industry requirements.

+27 16 423 7731 Contact Us

Acoustic Emission (AE)

Chemicals

Electromagnetic (ET)

Hardness (HT)

Magnetic Particle (MPI)

Material Analysers (MA)

Post-Weld Heat Treatment (PWHT)

Radiography (RT)