Ensure powerful and compliant MPI inspection on ferromagnetic materials.
The standard MY-2 is an articulating Leg Yoke used for Magnetic Particle Inspection (MPI). It generates a powerful, consistent magnetic field with good tangential field strength making it a highly reliable and versatile tool for detecting surface and near-surface flaws. Supplier: GammaTec NDT Supplies SOC Ltd
An AC electromagnetic yoke available in 110VAC electrical formats common in international industrial settings. The design is lightweight and ergonomic to reduce operator fatigue.
It is used to induce a strong, alternating magnetic field to detect and define surface-breaking and near surface flaws using dry magnetic powder or black / fluorescent magnetic ink.
Primarily used to induce a strong, localized magnetic field in a ferromagnetic component to detect and define surface-breaking discontinuities.
Commonly used for inspecting welds, pressure vessels, castings, and forgings for surface defects.
| Power Source: | 110V AC, 60 Hz |
| Leg Configuration: | Double jointed – Articulating |
| Magnetic Field Type: | Alternating Current |
| Lifting Power: | 4.5 kg (10 lbs) AC at 180mm pole spacing |
| Standard: | Meets ASTM E709/E1444 and EN-ISO 9934-3 standards |
| Current Draw: | Typically 2.5 Amps |
| (IP) Rating: | IP54 (Dust and water resistant) |
| Pole Spacing: | Adjustable from approximately 80 mm to 180 mm (3″ to 7″) |
| Duty Cycle: | 25% (max 30 sec ON 90 sec OFF) |
| Operating Temperature: | Typically 0 °C to 49 °C (32 °F to 120 °F) |
| Yoke Weight: | Approx. 2.4 kg (5.3 lb) |
AC Magnetic Yoke, Portable AC Yoke, Electromagnetic Yoke, Surface Crack Detector, Articulating Leg Magnetic Yoke, MPI Yoke, Contour Probe
The difference is only the **input voltage requirement**, making them compatible with various regional power supplies.
**Errors and omissions excepted (E&OE)
Our team of Non-Destructive Testing experts is ready to help you find the perfect equipment and solutions tailored to your specific industry requirements.
