Gammatec Sidebar Resources

Quick Resources

Brochures & Datasheets

Calibrations & Repairs

Material Safety Sheets

Training Hub

Products

GUL Wavemaker G4 Mini Guided Wave Testing System

Achieve long-range pipe integrity screening in congested or restricted areas where full access is impossible. The Wavemaker G4 Mini is a compact and highly portable Guided Wave Testing (GWT) System used for long-range inspection of piping. It features advanced signal processing and an intuitive interface, making it quick to deploy and analyze. The G4 Mini is capable of inspecting long pipe runs for metal loss and corrosion from a single point, significantly reducing the need for extensive scaffolding and providing rapid screening results. Supplier: Guided Ultrasonics Ltd. (GUL)

Flyability Elios 3 UT Payload

Performs a contact thickness measurements from the safety of the ground in confined spaces. The Elios 3 UT Payload is a specialized drone accessory that integrates a laser-based ultrasonic testing (UT) system onto the Elios 3 inspection drone. It is used to remotely measure material thickness and detect corrosion in inaccessible industrial assets. This payload is essential for quantifying defects and monitoring corrosion rates without requiring high-risk human entry or scaffolding. UT” stands for Ultrasonic Testing, an NDT technique used to inspect materials, detect flaws, or measure thickness using ultrasound without damaging the object being tested. The UT Payload is a module designed as a collaboration between Cygnus Instruments and Flyability. It is mounted on the Elios 3 drone and is used to perform ultrasonic testing. UT is not a simple technique and requires the correct training and understanding of the technology and its outputs. Supplier: Flyability SA

Incertech Chino AH4712 12-Point Temperature Recorder

Provide essential digital and analogue recording for complex heat treatment cycles. The Tecorder AH4712 12 Point Hybrid is a versatile instrument that combines digital data logging with simultaneous paper chart recording for up to 12 thermocouple inputs. It solves the problem of needing both a permanent, verifiable physical record and digital data for detailed analysis, ensuring complete compliance and quality assurance for stress relief and preheat treatment procedures. Supplier: Incertech

CHC Navigation AA9 Airborne LiDAR and RGB System

The AlphaAir 9 stands as a refined aerial mapping system, fusing LiDAR and RGB imaging to deliver professional-grade UAV LiDAR surveying and photogrammetry. Built on CHCNAV’s advanced LiDAR technology, it combines high-accuracy LiDAR, GNSS positioning, IMU orientation, and an industrial orthophoto camera in one unified platform. When paired with CHCNAV’s point cloud and image fusion software, it offers a survey-level, efficient, and cost-effective path to 3D data capture and processing. In a single flight, the AA9 gathers precise 3D information and streamlines the journey from data collection to a true-to-life 3D model. Supplier: CHC Navigation

CHC Navigation CoProcess Drone Inspection Software System

Transform raw drone data into actionable 3D reports for efficient asset integrity management. Coprocess is a comprehensive Drone Inspection Software System designed for processing, analyzing, and reporting data collected by industrial inspection drones (e.g., X500). It provides 3D mapping, measurement tools, and automated defect localization. The platform allows for the efficient management of large datasets, facilitating collaborative review and the creation of detailed, geo-referenced inspection reports, ultimately streamlining the integrity management workflow. Supplier: CHC Navigation

Incertech Chino EH3127/001 12-Point Analogue Temperature Recorder

Provide essential, irrefutable documentation of heat treatment profiles for compliance and quality assurance. The EH3127/001 12 Point Analogue Temperature Recorder is a reliable, chart-based instrument used to permanently record temperature data over time. This model simultaneously records data from up to 12 independent thermocouples onto a single circular chart. It is valued for its simplicity, robustness, and visual record of the heating/cooling profile, ensuring compliance with specifications like API and ASME standards for stress relief and preheat monitoring. Supplier: Incertech

Ether NDE WeldCheck 3 Eddy Current Flaw Detector

The WeldCheck 3 is a dual-frequency eddy current flaw detector, with conductivity, which means that the instrument can be used for dual and single frequency applications. With improved physical and ergonomic design the WeldCheck 3 brings ETher NDE’s WeldCheck series right up-to-date. Based on in-field operator feedback and embracing the use of new case materials, the WeldCheck 3 delivers the end user enhanced ruggedness, a toughened screen, improved connector access and performance, combined optional features such as an encoder wheel. Supplier: Ether NDE Ltd.

GammaTec MY-2 Articulating Leg Magnetic Particle Yoke – 110V

Ensure powerful and compliant MPI inspection on ferromagnetic materials. The standard MY-2 is an articulating Leg Yoke used for Magnetic Particle Inspection (MPI). It generates a powerful, consistent magnetic field with good tangential field strength making it a highly reliable and versatile tool for detecting surface and near-surface flaws. Supplier: GammaTec NDT Supplies SOC Ltd

GammaTec PM2004 Permanent Magnet Magnetic Particle Yoke

Achieve high-density MPI results in remote areas without electricity. The PM2004 is a more powerful variant of the Permanent Magnet Magnetic Particle Yoke designed for use where electrical power is unavailable or prohibited. It utilizes a strong magnetic circuit to create a high-density magnetic field for highly reliable Magnetic Particle Inspection (MPI). The yoke is self-contained, rugged, and portable, making it ideal for detecting surface defects in ferromagnetic welds, castings, and components in hazardous field locations. Supplier: GammaTec NDT Supplies SOC Ltd

GammaTec MY-2 Articulating Leg Magnetic Particle Yoke – 220V

Cygnus 2+ Hands-Free Ultrasonic Thickness Gauge

Maximize safety and productivity during UT inspections at height or in restricted access areas. The Cygnus 2+ Hands-Free is a robust Ultrasonic Thickness Gauge that uses the Multiple-Echo technique for through-coat measurements. This model features a wearable wrist-mounted display and a helmet-mountable remote display, allowing the operator to keep both hands free for safe maneuvering and measurement, making it ideal for industrial rope access NDT. Supplier: Cygnus Instruments Ltd.

Cygnus 6+ PRO Ultrasonic Thickness Gauge

Manage massive corrosion data sets and complex inspections with a single, versatile gauge. The Cygnus 6+ Pro is a highly advanced Ultrasonic Thickness Gauge offering Multiple-Echo, Single-Echo, and Echo-Echo modes for maximum application flexibility. It features a comprehensive data logging system (up to 500,000 measurements), a large, bright LCD screen, and Bluetooth data transfer. The rugged design makes it the professional choice for detailed corrosion surveys in challenging industrial environments. Supplier: Cygnus Instruments Ltd.

Tracerco NORM IS Radiation Survey Meter

Safely and compliantly detect Naturally Occurring Radioactive Material (NORM) in hazardous industrial sites. The NORM IS is an Intrinsically Safe (IS) Radiation Survey Meter specifically designed for NORM detection in environments like the oil & gas and mineral processing industries. Certified for use in hazardous (Ex) areas, it features a large, easy-to-read display and provides accurate measurements of alpha, beta, and gamma radiation associated with NORM, ensuring workplace safety. Supplier: Tracerco

Tracerco PED 2 Plus Personal Electronic Dosimeter

Tracerco™ Personal Electronic Dosimeter Gen 2 (PED2) is a rugged, compact X-ray and gamma radiation monitor that delivers real-time dose tracking with clear alerts, intuitive controls, and seamless data management. Supplier: Tracerco

Cygnus Dive Underwater Thickness Gauge

A sturdy, wrist-mountable ultrasonic underwater thickness gauge, the Cygnus DIVE offers a crucial free hand for ultrasonic thickness measurement. (UTM) undersea. Even in the worst visibility, the diver and his camera can readily view the huge, brilliant display with Live A-scan. The gauge has an easy-to-use menu with only two buttons to press. Supplier: Cygnus Instruments Ltd.

Ether NDE AeroCheck 3 Eddy Current Flaw Detector

Available with or without the thumbwheel option the AeroCheck 3 Dual Frequency Flaw Detector delivers the best in Eddy Current performance, with rotary inspection C-Scan capabilities as standard, together with variety of advanced features. The AeroCheck 3 offers improved mechanical and ergonomic design together with variety of advanced features. Based on operator feedback and embracing the use of new materials, the AeroCheck 3 embodies enhanced ruggedness, a toughened screen, improved connector access and performance, combined with optional features such as an encoder wheel. The dual frequency AeroCheck 3 has a frequency range of 10Hz to 20MHz, ensuring a diverse range of real world applications can be met. Supplier: Ether NDE Ltd.

End of Results

Gammatec Contact Block

Need Assistance or Looking for Something Else?

Our team of Non-Destructive Testing experts is ready to help you find the perfect equipment and solutions tailored to your specific industry requirements.

+27 16 423 7731 Contact Us

Acoustic Emission (AE)

Chemicals

Electromagnetic (ET)

Hardness (HT)

Magnetic Particle (MPI)

Material Analysers (MA)

Post-Weld Heat Treatment (PWHT)

Radiography (RT)

Ultrasonic (UT)

Visual (VI)

Wire Rope