Gammatec Sidebar Resources

Quick Resources

Brochures & Datasheets

Calibrations & Repairs

Material Safety Sheets

Training Hub

Products

Cygnus 2+ Hands-Free Ultrasonic Thickness Gauge

Maximize safety and productivity during UT inspections at height or in restricted access areas. The Cygnus 2+ Hands-Free is a robust Ultrasonic Thickness Gauge that uses the Multiple-Echo technique for through-coat measurements. This model features a wearable wrist-mounted display and a helmet-mountable remote display, allowing the operator to keep both hands free for safe maneuvering and measurement, making it ideal for industrial rope access NDT. Supplier: Cygnus Instruments Ltd.

Sonatest PSS and SW / SNW Wedges

The PSS Transducers and SW / SNW Wedges range consists of single crystal detachable angle beam shear wave quick-change transducers designed for use with "Standard" (SW) and "Snail" (SNW) wedge variants. Constructed with lead zirconate titanate (PZT) crystals, these probes offer reliable acoustic efficiency, full compliance with American Welding Society (AWS) standards, and modular quick-change flexibility for demanding weld testing tasks.

Flyability Elios 3 Gas Sensor Payload

The Flammable Gas Sensor Payload by Flyability is a type of sensor built to add an additional layer of safety to Elios 3 drone operations. It is used to detect and measure the concentration of combustible gases in the air, which may ignite or explode if exposed to an ignition source. This Payload should not replace standard gas detection procedures and is not built as a tool to search for gas concentrations. If any level of gas is detected you should immediately exit the area with the drone and shut off the drone. Supplier: Flyability SA

Flyability Elios 3 Surveying Payload

Turn visual inspection data into precise, measurable 3D models for engineering analysis. It transforms standard inspection data into accurate, measurable 3D models of industrial assets and infrastructure. This payload is essential for tasks requiring precise geometry verification and volume calculation, providing actionable surveying information from confined spaces. Supplier: Flyability SA

Oserix Exertus Selen 80 Circa Industrial Gamma Ray Projector Package

Address the need for high-quality, mobile radiography with uncompromised safety. The Exertus Selen 80 Circa is a lightweight Gamma Ray Projector Package rated for up to 80 Ci of Selenium-75. The package includes a 10m remote control for operation from a safe distance. Utilizing Tungsten (W) shielding in a robust stainless steel casing it is optimized for portability and rapid field setup. Supplier: Oserix S.A.

GammaTec IQI / Penetrameters Radiographic Indicators

Eliminate uncertainty about image quality and regulatory compliance in NDT. IQI (Image Quality Indicators), or Penetrameters, are precision-machined reference tools used to objectively verify the quality and sensitivity of your radiographic technique. They provide a measurable gauge of detail resolution. Available in various types (wire, step-wedge, and plaque) and material groups (e.g., Fe, Al, Ti), they ensure strict compliance with major NDT standards including ASTM, EN, and ISO specifications. Supplier: GammaTec NDT Supplies SOC Ltd

GammaTec GD-2 Digital X-Ray Film Densitometer

Eliminate subjective visual assessments of film density and ensure QC precision. The GD-2 Digital X-Ray Film Densitometer is an indispensable tool for Quality Control (QC) that accurately measures the optical density (D) of processed X-ray film. Supplier: GammaTec NDT Supplies SOC Ltd

Oserix Exertus Vox 100 Industrial Gamma Ray Projector Package

Overcome the challenge of penetrating thick-walled components and castings. The Exertus VOX 100 is a heavy-duty Industrial Gamma Ray Projector capable of handling Co-60 Sources up to 100 Ci. Its high-density (DU) shielding ensures low external surface dose rates and rugged construction guarantees reliability in harsh industrial conditions. Supplier: Oserix S.A.

GammaTec 2-Channel Isotope Emergency Storage Pot

Provide immediate, secure containment for sources following a retrieval failure or incident. A lead shielded 2 Channel Isotope Emergency Storage Pot is crucial for the temporary containment of up to two gamma source assemblies. Supplier: GammaTec NDT Supplies SOC Ltd

GammaTec 6-Channel Isotope Emergency Storage Pot

Provide immediate, secure containment for sources following a retrieval failure or incident. A lead shielded 6 Channel Isotope Emergency Storage Pot is crucial for the temporary containment of up to six gamma source assemblies. Supplier: GammaTec NDT Supplies SOC Ltd

GammaTec Single Cavity Isotope Emergency Storage Pot

Provide immediate secure containment for sources following a retrieval failure or incident. A lead shielded Single Cavity Isotope Emergency Storage Pot is crucial for the temporary containment of damaged or cut gamma source assemblies. Supplier: GammaTec NDT Supplies SOC Ltd

GammaTec 1-Channel Isotope Emergency Storage Pot

Provide immediate, secure containment for sources following a retrieval failure or incident. A lead shielded 1 Channel Isotope Emergency Storage Pot is crucial for the temporary containment of a single gamma source assembly. Supplier: GammaTec NDT Supplies SOC Ltd

Baugh & Weedon Truflux Magnetic Flux Leakage Tester

Baugh and Weedon have been designing and manufacturing the TruFlux MFL for a number of years, with customers around the globe in the UAE, Singapore, Phillipines, Taiwan, Area, Israel, India, Greece, Brazil and Mexico amongst others. Supplier: Baugh & Weedon Ltd.

Ether NDE EtherCheck Eddy Current Flaw Detector

EtherCheck ET/Bond Testing Flaw Detector has been designed for NDE on Aerospace specific applications. EtherCheck offers the operator a rich range of features combined with the most widely used acoustic bond testing method; Pitch-Catch. A common user interface between the two modes, resulting in simple operator led set up. Supplier: Ether NDE Ltd.

Ether NDE ETI-300 / ETI-350 Eddy Current Instrument

Ensure the long-term integrity of tubing and specialized components with advanced flaw detection. The ETI-300 / ETI-350 series comprises advanced Eddy Current Instruments known for highly accurate flaw detection. They specialize in complex applications such as non-ferromagnetic tube inspection (heat exchangers, condensers) and general surface crack detection. They feature sophisticated analysis capabilities, including lift-off compensation and digital filtering, making them ideal for demanding industrial maintenance and inspection programs. Supplier: Ether NDE Ltd.

Flyability Elios 3 Inspection Drone System Package

Eliminate the extreme risks and high costs of human entry into confined spaces. The Elios 3 Package is a cutting-edge Inspection Drone System featuring a collision-tolerant cage and advanced LiDAR technology. It is specifically designed for high-accuracy 3D mapping and visual inspection of confined spaces and industrial assets (tanks, boilers, tunnels). The LiDAR enables measurable 3D models, enhancing operational safety and efficiency by providing precise data from previously inaccessible areas. Supplier: Flyability SA

End of Results

Gammatec Contact Block

Need Assistance or Looking for Something Else?

Our team of Non-Destructive Testing experts is ready to help you find the perfect equipment and solutions tailored to your specific industry requirements.

+27 16 423 7731 Contact Us

Acoustic Emission (AE)

Chemicals

Electromagnetic (ET)

Hardness (HT)

Magnetic Particle (MPI)

Material Analysers (MA)

Post-Weld Heat Treatment (PWHT)

Radiography (RT)

Ultrasonic (UT)

Visual (VI)

Wire Rope