GammaTec Navigation
Your One Stop NDT Equipment Supplier
Office Hours: 7am-5pm Mon-Thu 7am-4pm Fri
Contact Us
GammaTec Mobile Navigation

Drones & Robotics

  • Home
  • Drones & Robotics
GammaTec Product Sidebar

Drones & Robotics

Take your inspections to new heights and into the most challenging environments with our advanced Drones & Robotics range. These remote-access technologies are designed to remove human risk by entering hazardous, confined, or elevated spaces that are otherwise difficult or dangerous to reach. This category features high-performance Inspection Drones, ruggedized Pipe Crawlers, and specialized Robotic Platforms equipped with state-of-the-art sensors. Whether you are inspecting flare stacks, internal tank shells, or subsea pipelines, these tools allow for rapid data collection, high-resolution visual reporting, and precise structural analysis without the need for costly scaffolding or hazardous man-entry.

Flyability Elios 3 Drone Range Extender

The Range Extender enhances signal propagation for Elios 3 in challenging environments like tunnels and enclosed spaces. By placing the antenna closer to the drone, it extends the radio link, ensuring safe and efficient inspections without entering hazardous areas. Supplier: Flyability SA
View Product
Chcnav's Professional Airborne LiDAR+RGB System: alpha air 10

CHC Navigation AA9 Airborne LiDAR and RGB System

The AlphaAir 9 stands as a refined aerial mapping system, fusing LiDAR and RGB imaging to deliver professional-grade UAV LiDAR surveying and photogrammetry. Built on CHCNAV’s advanced LiDAR technology, it combines high-accuracy LiDAR, GNSS positioning, IMU orientation, and an industrial orthophoto camera in one unified platform. When paired with CHCNAV’s point cloud and image fusion software, it offers a survey-level, efficient, and cost-effective path to 3D data capture and processing. In a single flight, the AA9 gathers precise 3D information and streamlines the journey from data collection to a true-to-life 3D model. Supplier: CHC Navigation
View Product

Flyability Elios 3 Surveying Payload

Turn visual inspection data into precise, measurable 3D models for engineering analysis. It transforms standard inspection data into accurate, measurable 3D models of industrial assets and infrastructure. This payload is essential for tasks requiring precise geometry verification and volume calculation, providing actionable surveying information from confined spaces. Supplier: Flyability SA
View Product
rear view angle of the flyability confined space surveying payload drone

Flyability Elios 3 Gas Sensor Payload

The Flammable Gas Sensor Payload by Flyability is a type of sensor built to add an additional layer of safety to Elios 3 drone operations. It is used to detect and measure the concentration of combustible gases in the air, which may ignite or explode if exposed to an ignition source. This Payload should not replace standard gas detection procedures and is not built as a tool to search for gas concentrations. If any level of gas is detected you should immediately exit the area with the drone and shut off the drone. Supplier: Flyability SA
View Product
Snowcat crawler for remote tank Inspection

Nexxis Snowcat Inspection Crawler Robot

The Snowcat is a breakthrough magnetic crawler for remote inspections with enhanced performance that delivers long-term cost-reduction and greater efficiencies by deploying purposeful, high-quality NDT sensors. The Snowcat advantage comes from its 360 degree continuous tilt camera, powerful zoom function and variable intensity LED lights allowing for a clear capture of video and still images in a variety of confined space scenarios. The Snowcat has the capability to incorporate other NDT sensors i.e UT, PAUT, Eddy Current on request. Supplier: Nexxis
View Product
front view angle of the flyability confined space surveying payload drone

Flyability Elios 3 UT Payload

Performs a contact thickness measurements from the safety of the ground in confined spaces. The Elios 3 UT Payload is a specialized drone accessory that integrates a laser-based ultrasonic testing (UT) system onto the Elios 3 inspection drone. It is used to remotely measure material thickness and detect corrosion in inaccessible industrial assets. This payload is essential for quantifying defects and monitoring corrosion rates without requiring high-risk human entry or scaffolding. UT” stands for Ultrasonic Testing, an NDT technique used to inspect materials, detect flaws, or measure thickness using ultrasound without damaging the object being tested. The UT Payload is a module designed as a collaboration between Cygnus Instruments and Flyability. It is mounted on the Elios 3 drone and is used to perform ultrasonic testing. UT is not a simple technique and requires the correct training and understanding of the technology and its outputs. Supplier: Flyability SA
View Product
Main view of the Nexxis panther pipe and confined inspection system

Nexxis Panther Inspection Crawler Robot

Conduct high-definition visual inspection and measurement inside large vessels and pipes. The Panther is a rugged, remote-controlled inspection crawler robot designed for navigating difficult internal environments. It is equipped with a high-resolution camera and powerful lighting to provide detailed visual inspection of corrosion and defects. The robot's modular design allows it to carry additional sensors (e.g., lasers for measurement) for safe and efficient internal asset integrity assessment. Supplier: Nexxis
View Product

Flyability Elios 3 Radiation Payload

A specialized radiation detection payload for the Elios 3 drone, developed in partnership with Mirion Technologies. It is used to detect, measure, and localize radiological dose fields within confined, potentially high-radiation spaces without exposing personnel. This payload enables remote radiation surveying and 3D mapping of hotspots for enhanced safety and operational planning.

Supplier: Flyability SA
View Product
the nexxis vetol robotic crawler from main view

Nexxis Vetol Vertical Pipeline Inspection Robot

Provide safe, comprehensive inspection inside vertical pipelines and storage tanks without human entry. The VETOL is a magnetic, remote-controlled robot specifically designed for vertical ascent and descent within ferrous pipes and tanks. It carries visual and NDT payloads (e.g., UT) to perform corrosion mapping and structural inspection in highly hazardous or inaccessible vertical assets. It eliminates the extreme risks associated with confined space work. Supplier: Nexxis
View Product
Chcnav's Advanced LiDAR Data Processing Software

CHC Navigation CoProcess Drone Inspection Software System

Transform raw drone data into actionable 3D reports for efficient asset integrity management. Coprocess is a comprehensive Drone Inspection Software System designed for processing, analyzing, and reporting data collected by industrial inspection drones (e.g., X500). It provides 3D mapping, measurement tools, and automated defect localization. The platform allows for the efficient management of large datasets, facilitating collaborative review and the creation of detailed, geo-referenced inspection reports, ultimately streamlining the integrity management workflow. Supplier: CHC Navigation
View Product
front view of the elios three confined space drone

Flyability Elios 3 Inspection Drone System Package

Eliminate the extreme risks and high costs of human entry into confined spaces. The Elios 3 Package is a cutting-edge Inspection Drone System featuring a collision-tolerant cage and advanced LiDAR technology. It is specifically designed for high-accuracy 3D mapping and visual inspection of confined spaces and industrial assets (tanks, boilers, tunnels). The LiDAR enables measurable 3D models, enhancing operational safety and efficiency by providing precise data from previously inaccessible areas. Supplier: Flyability SA
View Product
Chcnav's Professional Airborne LiDAR+RGB System: alpha air 9

CHC Navigation AlphaAir 10 Inspection Drone System

Efficiently cover large areas to create accurate 3D models for surveying and construction analysis. The Alphaair 10 is an Inspection Drone System optimized for photogrammetry and 3D modeling applications, especially in mining, construction, and surveying. It is known for its high efficiency in covering large areas, thanks to a robust flight platform and professional-grade camera stabilization. The system provides centimeter-level accuracy in mapping by integrating with advanced GNSS technology, offering a complete, reliable, and user-friendly solution for creating detailed digital twins. Supplier: CHC Navigation
View Product
chcnav's Airborne LiDAR+RGB System

CHC Navigation AlphaAir 450 Inspection Drone System

The AlphaAir 450 strips away complexity and opens the door to high-accuracy geospatial reality capture for newcomers and non-specialists. Blending an approachable workflow with impressive precision at an accessible price point, the AA450 delivers professional-level performance without the learning curve. Its lightweight, rugged design houses a powerful laser scanner, a 26 MP industrial-grade camera, and a finely tuned inertial navigation system, working together to produce clean, reliable, high-quality data every time. Supplier: CHC Navigation
View Product
The rotor UAV drone by CHCNAV product image

CHC Navigation X500 Inspection Drone System

The CHCNAV X500 rotor UAV is a professional drone engineered for exceptional payload capacity and endurance. Equipped with advanced flight controls and high-precision positioning, it delivers superior maneuverability, stability, and flight performance. Its built-in visual SLAM and obstacle detection radar ensure intelligent, safe operations. Compatible with CHCNAV sensors and third-party payloads, the X500 is ideal for applications such as surveying, urban surveillance, emergency scouting, disaster relief, and inspection missions. Supplier: CHC Navigation
View Product
Gammatec Contact Block

Need Assistance or Looking for Something Else?

Our team of Non-Destructive Testing experts is ready to help you find the perfect equipment and solutions tailored to your specific industry requirements.

+27 16 423 7731 Contact Us
Gammatec Sidebar Resources

Quick Resources

Brochures & Datasheets
Calibrations & Repairs
Material Safety Sheets
Training Hub