Transducers & Wedges

Phoenix GSW 2-45° (8 x 9) Single Angle – Lemo00

Offers superior performance with a larger bandwidth for greater signal-to-noise ratio. Available with a stainless steel case, modified internal design and rear entry connectors.

Phoenix TSW 2-45° Twin Angle – Subvis

Twin crystal shear wave transducers hold two crystals mounted at inward angles that provide improved near-surface resolution and superior signal-to-noise ratio. Ideal for inspecting thin materials for small flaws, occurring directly under the surface.

Sonatest X5 Phased Array UT Wedge

General-purpose coupling for standard phased array probes on flat surfaces is solved by this Phased Array UT Wedge. This reliable wedge establishes the acoustic interface, allowing the phased array unit to accurately steer and focus the ultrasonic beam for efficient NDT. Supplier: Sonatest Ltd.

Phoenix HSSW 2-45° Single Angle High Temp (SMS) – Lemo00

Metal case transducers recommended for continuous use at 120°C or intermittently at 200°C.

WTOFI 12/60 TOFD Wedge, Plastic, 60 degree

Manufactured in black plastic with irrigation and gimbal pin options. For use with DTOF and CDTOF transducers.

Sonatest TSTARC 4 MHz Twin Crystal UT Probe

High-resolution detection of small flaws and accurate thickness measurement in challenging components is solved by this TSTARC 4MHz Twin Crystal UT Probe. This dual element probe uses a separated crystal design to improve signal-to-noise ratio and enhance near-surface resolution. Supplier: Sonatest Ltd.

Phoenix LSW 1-45° Single Angle – Lemo00

Ideal for the general purpose testing of welds, plate, pipe tubing, castings and forgings.

CDTOF 10/01–10MHz 3mmØ Composite TOFD probe M12 thread – Lemo00

Highly damped transducers in a threaded housing, for use with demountable wedges in piezo-composite materials.

Phoenix SAC 2-45° – 10mm Single Angle – Lemo00

Used for the inspection of coarse grained and attenuative materials such as stainless steel or duplex.

Phoenix plastic WREN 12/60 – 60° irrigated M12 thread

Ideal for use with the WREN Scanner and DTOF and CDTOF transducers with a reduced land, enabling wedges to sit closer to the weld cap.

Phoenix SC 1 – 20 Single Compression – Lemo00

Used to measure thickness and detect flaws on plates, bars, forgings and castings. Constructed in a durable plastic case with a ceramic face and integrated stainless steel wear ring.

CDTOF 10/02-10MHz, 6mmØ M12 Transducer – Lemo00

Highly damped transducers in a threaded housing, for use with demountable wedges in piezo-composite materials.

Phoenix SMS 5-45° top entry – Subvis

Ideal for inspections in areas with reduced access.

DTOF 5/01-5MHz x M12 TOFD transducer

Highly damped ceramic faced transducers in a threaded housing.

Phoenix SMS 5-60° top entry – Subvis

Ideal for inspections in areas with reduced access.

Phoenix SC5-5 Single Compression – Subvis

Used to measure thickness and detect flaws on plates, bars, forgings and castings. Constructed in a durable plastic case with a ceramic face and integrated stainless steel wear ring.

End of Results

Gammatec Contact Block

Need Assistance or Looking for Something Else?

Our team of Non-Destructive Testing experts is ready to help you find the perfect equipment and solutions tailored to your specific industry requirements.

+27 16 423 7731 Contact Us

Acoustic Emission (AE)

Chemicals

Electromagnetic (ET)

Hardness (HT)

Magnetic Particle (MPI)

Material Analysers (MA)

Penetrant Testing (PT)

Post-Weld Heat Treatment (PWHT)

Radiography (RT)

Ultrasonic (UT)

Visual (VI)

Wire Rope

Quick Resources