ULTRASONIC BOLT TENSION 

 

 

·               EQUIPMENT

 

Product Code   Description

NCG0047          Dakota Mini-Max Bolt Tension Gauge

 

INTRODUCTION:  
      
The MINI-MAX, Ultrasonic Bolt Tension Monitor, defines
the state of the art in the

measurement of the actual elongation produced by tightening a threaded fastener. 

The MINI-MAX can measure the elongation very accurately in fasteners of virtually

any material from 1/2 inch to 4 feet in length.The measurement is achieved by

determining  the change in thetransit time, of an ultrasonic shock wave along the

length of the fastener as the fastener is tightened by any method. 

The on-board microcomputer automatically interprets this time measurement to

display the time(nanoseconds), elongation, load, stress, or %strain from stretching

a fastener.  Through the use of high speed digital signal processing and automated

diagnostics, the MINI-MAX minimizes the requirement for extensive operator training. 

With built in data recordation and reporting through an RS232 interface,the MINI-MAX

offers an easy to use and reliable solution to the most difficult bolting problem.

 

KEY FEATURES:
 
The first cost effective ultrasonic solution available on the market.
Effectively monitor your bolts during periodic shutdowns over the service
life of the fastener.
Visually compare the unloaded to the loaded waveform.
Measurement quantities - Time (nanoseconds), Elongation, Load, Stress,
and %Strain.
Display Options - RF, Rectified, Large Digits with Limits Bar.
Display Resolution - 1/8" VGA 240 x 160 pixels.
Stores 8000 readings and waveforms in multiple groups.
Built-in Linear regression or vector for optimizing load measurements.
The Auto Set feature automatically optimizes detection and adjusts display.
Hi/Lo alarm tolerance limits work in conjunction with the data port and external
pump shut-off device.

 

Note: The MINI-MAX is backed by a 2 warranty.

 

·               ACCESSORIES

 

Product Code   Description

NCT0228           Dakota 2.25mHz x .5” Magnetic Single Element Transducer

NCT0229           Dakota 5mHz x .5” Magnetic Single Element Transducer

NCP0108           Dakota Mini-Max Temperature Sensor

 

 Copyright © 2000 - 2003 GammaTec Pty (Ltd). All Rights Reserved. Back To Top | Print page